Hold Fast Rigging System – XL
Quick safety reference and setup guide for the Hold Fast XL.
Always inspect before use.
Important:
This page is a quick reference only and does not replace formal training, industry standards, or professional judgment. Use only by trained operators following accepted rigging practices.
Quick Specs
Model: Hold Fast XL
Working Load Limit: Bollard: 2500 LBS, Winch: 1500 LBS
Compatible Rope Sizes: Bollard : 5/8", Winch: 1/2"
Intended Use: Not for human life support. Controlled lifting and lowering of materials.
Safety – Inspect Before Every Use
If any component shows signs of damage, excessive wear, or deformation, remove it from service immediately.
Inspect the device for cracks, deformation, or damage
Inspect ropes and slings for cuts, glazing, or abrasion
Avoid shock loading and side loading
Confirm anchor integrity and load path
Never exceed rated working load limits
Setup & Use
Read the safety manual and watch the setup before first use.
Maintenance & Storage
Tighten the winch drum before lifting
Clean after use
Store dry
Remove from service if damaged
Manufactured by Rope Management Solutions, LLC.
Need Help?
For questions, replacement parts, or inspection concerns, email Hold Fast Rigging Systems at
